Description

Main Technical Specifications

1. Ultimate negative pressure value: ≥0.075MPa
2. Regulating scope of negative pressure: 0.02MPa ～ultimate negative pressure value
3. Air exhausting speed:≥15L/min
4. Reservoir: ≥1000 mL, 1pc
5. Power supply: AC220V/110V and 50/60Hz, DC12V with battery.
6. Input power: 250VA
7. Noise: ≤65dB(A)
8. Suction pump: piston pump
9. Dimension: 335mm X 150mm X 240mm

• Electric classification: application part of class II type B
• Operation mode: short-time operation
• The suction unit is not suitable to use on occasions with inflammable and explosive gas.
• Class of liquid-proof: IPX0
• Non AP or APG device
• No signal input or signal output

AC function: connected with power supply. DC function in-car: please connect the power cord to the automobile cigarette lighter, follow the indications of indicator light as the below list. Battery function: Charge for about 4 hours before using the DC function. The life of the battery is to charge for about 350 times. The charging time and working time of the battery decreases its working time increases.

Normal Working Condition

Ambient temperature: 5℃-40℃

Relative humidity: ≤80%

Atmospheric pressure: 86kPa-106kPa

• When storage and transportation temperature is lower than 5℃, the suction unit shall be placed in the place with normal working temperature for over 4 hours before use.
• To avoid potential electromagnetic interference existing between the equipment and other devices, the suction unit is suggested to be kept away from high frequency equipment.

List of Accessories

Vehicle power line 1 piece

Fuse (F1.5VL250V, φ5 X 20) 2 pieces

Silicone hose 3 pieces

Air filter 3 pieces

Disposable suction head 2 pieces

Catheter package 2 pieces